The system build up was designed to provide a stable and solid base for the insulation system and at the same time to allow water vapor to freely penetrate the surrounding environment.
- Firm and stable foundation under ETICS
- In combination with Ceresit CT 76 plaster, you can use a shade with an HBW of more than 15% over the entire surface
Ceresit CT 84**
Ceresit CT 190***
Ceresit CT 325****
Ceresit CT 15 / CT 16
Ceresit CT 79*****
- CONSTRUCTION BOARD
- TIMBER FRAME WALL WITH MW THERMAL INSULATION
- RIGID CONSTRUCTION BOARD FERMACELL / CETRIS*
- POLYURETHANE READY TO USE ADHESIVE: Ceresit CT 84**
- MW INSULATION BOARDS WITH ADDITIONAL DOWELS IF NECESSARY
- MINERAL BASECOAT: Ceresit CT 190***
- GLASS FIBRE MESH: Ceresit CT 325****
- PRIMING PAINT (KEY COAT): Ceresit CT 15 / CT 16
- FINISHING RENDER: Ceresit CT 79*****
* Plywood, cement bonded particleboards, solid wood panels (SWP), particleboards, plasterboards, fibreboard hard and medium, MDF, fireboards, cement fibreboard.
** Alternative: mineral adhesive Ceresit CT 80 or Ceresit CT 180 or Ceresit CT 190 with appropriate substrate preparation and / or primer.
*** Alternative: mineral basecoat Ceresit CT 80 with appropriate key coat if necessary.
**** To increase impact resistance use double mesh.
***** Other mineral, silicate, silicone, and hybrid finishes are possible acc. to ETA.
If you would like to view a technical drawing for your chosen prefabricated system solution, please fill in your contact details below and we will send it to you!
We are happy to support you with any questions regarding our products, where to buy, or what is the right solution for your project.
