The system build up was designed considering the requirement of diffusion impermeability of the system build up. Water vapor from the interior does not penetrate the system build up, but the water vapor contained in the thermal insulation, due to the Double Dry effect, escapes through the thin-layer plaster into the environment. Plaster with Double Dry continues to protect the entire formation from the weather!
- Perfect protection against the weather
- Water vapor from the perimeter structure passes through to the external environment
Ceresit CT 84**
Ceresit CT 190***
Ceresit CT 325****
Ceresit CT 79*****
- CONSTRUCTION BOARD
- IMPERMEABLE AIR BARRIER MEMBRANE
- TIMBER FRAME WALL WITH MW INSULATION
- RIGID CONSTRUCTION BOARD OSB / FERMACELL / CETRIS*
- POLYURETHANE READY TO USE ADHESIVE: Ceresit CT 84**
- MW INSULATION BOARDS WITH ADDITIONAL DOWELS IF NECESSARY
- MINERAL BASECOAT: Ceresit CT 190***
- GLASS FIBRE MESH: Ceresit CT 325****
- FINISHING RENDER: Ceresit CT 79*****
* Plywood, cement bonded particleboards, OSB, solid wood panels (SWP), particleboards, plasterboards, fibreboard hard and medium, MDF, fireboards, cement fibreboard, gypsum fibre board.
** Alternative: mineral adhesive Ceresit CT 80 or Ceresit CT 180 or Ceresit CT 190 with appropriate substrate preparation and / or primer.
*** Alternative: mineral basecoat Ceresit CT 80 with appropriate key coat if necessary.
**** To increase impact resistance use double mesh.
***** Other mineral, silica
If you would like to view a technical drawing for your chosen prefabricated system solution, please fill in your contact details below and we will send it to you!
We are happy to support you with any questions regarding our products, where to buy, or what is the right solution for your project.
