The system build up was designed considering the requirement of diffusion impermeability of the system build up. Water vapor from the interior does not penetrate the system build up, but the water vapor contained in the thermal insulation, due to the Double Dry effect, escapes through the thin-layer plaster into the environment. Plaster with Double Dry continues to protect the entire formation from the weather!
- Perfect protection against the weather
- Water vapor from the perimeter structure passes through to the external environment
Ceresit CT 84*
- COVERING LAYER FROM THE INTERIOR (SDK / OSB / FERMACELL)
- FRONT WALL WITH MW THERMAL INSULATION
- IMPERMEABLE AIR BARRIER MEMBRANE
- SUPPORTING WOODEN STRUCTURE
- MW THERMAL INSULATION
- BEARING BASE: WOOD FIBREBOARD (OSB) / GYPSUM FIBREBOARD (FERMACELL) / CEMENT FIBREBOARD (CETRIS)
- CERESIT CT 19 PRIMER (OPTIONAL)
- POLYURETHANE READY TO USE ADHESIVE: Ceresit CT 84*
- EPS THERMAL INSULATION MECHANICALLY ANCHORED WITH ANCHORS
- REINFORCEMENT LAYER CERESIT CT 85** WITH INCORPORATED GLASS-TEXTILE MESH CERESIT CT 325*** OR OTHER REINFORCEMENT MESH ≥ 165 G/M² MEETING ETA
- CONCEALED PRIMER CERESIT CT 16
- CERESIT CT 74 OR CERESIT CT 76 THIN-LAYER PLASTER
* Alternative: mineral adhesive Ceresit CT 80 or Ceresit CT 180 or Ceresit CT 190 with appropriate substrate preparation and / or primer.
** Alternative: mineral basecoat Ceresit CT 80 with appropriate key coat if necessary.
*** To increase impact resistance use double mesh.
If you would like to view a technical drawing for your chosen prefabricated system solution, please fill in your contact details below and we will send it to you!
We are happy to support you with any questions regarding our products, where to buy, or what is the right solution for your project.
