Skip to Content

CERESIT CT 60 THERMOPROJECT ACRYLIC DECORATIVE PLASTER WITH SILICONE

  • Resistance to climatic factors
  • Low-water absorption and very elastic
  • Resistance to mechanical shocks

Features and benefits

Thin-bed decorative acrylic plaster with added silicone, for indoor and outdoor application. Stone like structure

Properties

Description

CERESIT® CT 60 THERMOPROJECT is used for making fine plasters on concrete substrates, traditional plasters, gypsum substrates and gypsum cardboards, etc. CT 60 can be used within the complex systems for insulating the external walls of buildings, CERESIT Ceretherm ETICS, with the help of EPS boards.
Available pack size: 25 kg

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

CERESIT CT 60 THERMOPROJECT SUBSTRATE PREPARATION

CERESIT CT 60 THERMOPROJECT can be applied on smooth, carrying, dry and clean substrates free from grease, bitumen, dust and other substances decreasing adhesion. Uneven and damaged substrates should be first smoothed and repaired. The existing dirt, layers of low-strength, as well as elastic, lime and adhesive paint coatings should be removed. It can be applied when the priming paint CT 16 is completely dry.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

APPLICATION OF CERESIT CT 60 THERMOPROJECT

CERESIT CT 60 THERMOPROJECT should be evenly applied on the substrate at the thickness of the grain by means of a steel long float held at the angle. Then, it should be given homogenous structure with round movements by means of a plastic long float flatly held to achieve the appearance densely laid out aggregate grains structure. Work should be done on one surface without breaks, keeping the same product consistency. 

CERESIT Tiling CE60 LP Instructions Illustration Step 3

IMPORTANT TO NOTE WHEN USING CERESIT CT 60 THERMOPROJECT

Application should be performed in the ambient and substrate temperature ranging from +5 °C to +25 °C and the humidity below 80 %. This product should not be mixed with other plasters, pigments, resins and binders. The rooms where the material has been applied should be aired. In case of contact with eyes, they should be rinsed with water and the general practitioner should be consulted. 

Related how to guides

  • How to apply different types of plasters?
    How to apply different types of plasters?
  • How to apply architectural concrete plaster
    How to apply architectural concrete plaster?
  • Fix EPS insulation boards with adhesive mortar?
    How to fix EPS insulation boards with adhesive mortar?
  • Fix EPS insulation boards with PU adhesive?
    How to fix EPS insulation boards with PU adhesive?
  • How to repair mechanical damages in plastered insulation?
    How to repair mechanical damages in plastered insulation?
  • How to prepare the substrate for installation of the insulation layer
    How to prepare the substrate for installation of the insulation layer
  • Decorative plaster with visage stone effect
  • How to cope with bio contamination on facade

Related products

  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-16/SAP_0201IGC014E8/searchResult.productFields.MainImageAltText}
    CERESIT CT 16
    Dispersion of synthetic resins to prime the substrates for thin layer mineral, acrylic, silicate-silicone, silicone and elastomeric plasters. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-thermo-universal/SAP_0201IAC015R0/searchResult.productFields.MainImageAltText}
    CERESIT THERMO UNIVERSAL
    Reinforcing Rendering Mortar - Basic coating XPS, EPS, MW. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-74/SAP_0201IDC014L4/searchResult.productFields.MainImageAltText}
    CERESIT CT 74
    Decorative thin-layer plaster for indoor and outdoor applications, stone structure, grain 1.5, 2.0 or 2.5 mm 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-zu/SAP_0201IAC016A1/searchResult.productFields.MainImageAltText}
    CERESIT ZU
    For polystyrene foam and making a reinforced layer; for fixing polystyrene boards and for making a thin layer reinforced with mesh on them when insulating buildings using the light-wet method. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-zs/SAP_0201IBC016A0/searchResult.productFields.MainImageAltText}
    CERESIT ZS
    For fixing expanded polystyrene boards in the insulation of buildings in ETICS systems using the light-wet method. 

Frequently asked questions