-
Hydrophobic and resistant to dirt
-
Vapour permeable
-
Low water absorption
-
Resistant to weather conditions and damage
-
BioProtect formula: resistant to fungi, algae, moul
-
Possibility of machine application
CERESIT® CT 174 combines good points of silicate plaster and silicone plaster. It is vapour permeable, of low absorbability and dirt resistant. It is used for making thin layer plasters on concrete substrates, traditional plasters, gypsum substrates and chipboards. It is recommended its application as facade plaster within complex system of warming walls of outside buildings CERESIT Ceretherm ETICS with the application of EPS boards and MW. It is protected form biological paralyses. Available pack size: 25 kg.
CERESIT CT 174 can be applied on smooth, carrying, dry and clean substrates free from grease, bitumen, dust and other substances decreasing adhesion. Uneven and damaged substrates should be first smoothed and repaired. The existing dirt, layers of low strength, as well as elastic, lime and adhesive paint coatings should be removed. CT 174 can be applied when CT 16 becomes completely dry.
CERESIT CT 174 should be evenly applied on the substrate at the thickness of the grain by means of a steel long float held at the angle. Then, it should be given a homogeneous structure with round movements by means of a plastic long float flatly held to achieve the appearance densely laid out aggregate grains structure. Work should be done on one surface without breaks, keeping the same product consistency.
Application should be performed in the ambient and substrate temperature ranging from +5 °C to +25 °C and the humidity below 80 %. This product should not be mixed with other plasters, pigments, resins and binders. The rooms where the material has been applied should be aired. In case of contact with eyes, they should be rinsed with water.
CT 174 is used for making thin-layer plasters in insulation systems. We recommend its application as facade plaster within CERESIT Ceretherm ETICS with the application of EPS-boards and mineral wool. CT 174 plastr recommended to be applied to external walls where high-permeability is required together with very low water absorption and high dirt resistance.
CERESIT CT 174 can be applied on concrete substrates, traditional plasters, gypsum substrates and chipboards, gypsum cardboards, etc.
CERESIT CT 174 is present in CERESIT Ceretherm AQUASTATIC System