- Universal on mineral and polymeric based substrates
- Very high vapor permeability
- Hydrophobic
-
Universal on mineral and polymeric based substrates
-
Very high vapor permeability
-
Hydrophobic
-
Long term durability and facade protection
-
For fresh mineral plasters
-
Highly resistant to fungi, algae, etc.
CERESIT® CR 55 is formulated with hybrid silicate binder that ensures unique physical and chemical properties, excellent parameters and long-term durability, without changing the technical and aesthetic parameters of the finish during the use cycle. CR 55 is dedicated to be used outdoor and indoor, especially recommended for protecting of coated areas against weathering, biological corrosion and where high durability and dirt-resistance. Available pack size: 15 l and 3,5 l
CERESIT CR 55 may be applied on carrying, smooth, dry and clean substrates. Firstly uneven and damaged substrates should be repaired. It is recommended to check the strength of the existing mineral layers. The existing dirt, layers of low strength, lime and adhesive paint coatings, residuals of wall paper or glues should be completely removed. After being washed with water, the substrate should dry.
Before the paint application, the content of the container should be carefully stirred by means of the drill with a mixer for about 2 minutes. Usually it is sufficient to paint twice. Between the application of the subsequent layers at least 12-to 24-hour technological breaks should be maintained. CR 55 should be applied by means of a brush, roller or a spray device. It is important to apply the paint evenly. Application with spray machine using pressure machines is feasible. If there is such a need, it is possible to add not more than 5% of water and stir carefully
Application should be performed in dry conditions with the ambient and substrate temperature ranging from +5 °C to +25 °C and the humidity below 80 %. The paint may cause discoloration impossible to be removed, therefore all the elements in contact with CR 55 should be protected. Skin and eyes should be protected. Protective gloves and glasses should be worn while applying the paint.
CERESIT CR 55 is dedicated to be used outdoor and indoor, especially recommended for protecting of coated areas against weathering (e.g. sour rain), biological corrosion and in cases where high durability and dirt-resistance.
CERESIT CR 55 can be applied on the mineral substrates (concrete, cement plasters, lime–cement and lime plasters, gypsum, etc.) as well as on many polymeric based substrates.
CERESIT CR 55 is present in CERESIT Renovation System