- Highly vapour permeable/breathable
- Resistant to damage and weather conditions
- Biological contamination resistance strengthened by high PH
-
Highly vapour permeable/breathable
-
Resistant to damage and weather conditions
-
Biological contamination resistance strengthened by high PH
-
Low-water absorption
-
Possibility of machine application
CERESIT® CT 72 is used for making thin-layer plasters on concrete substrates, traditional plasters, gypsum substrates and chipboards, gypsum cardboards, etc. CT 72 plaster is recommended to be applied on the partitions where high permeability is required. It is available in a wide range of colours, but in case of intensive dark colours, the application should be limited to small areas. CT 72 is protected form biological paralyses. Available pack size: 25 kg
CERESIT CT 72 can be applied on smooth, carrying, dry and clean substrates free from substances decreasing adhesion. Uneven and damaged substrates should be first smoothed and repaired. The existing dirt, layers of low strength, as well as elastic, lime and adhesive paint coatings should be removed. CT 72 can be applied when the priming paint CT 15 is completely dry.
The whole content of the container should be carefully stirred. CERESIT CT 72 should be evenly applied on the substrate at the thickness of the grain by means of a steel long float held at the angle. Then, it should be given homogenous structure with round movements. Do not sprinkle plaster with water! Work should be done on one surface without breaks, keeping the same product consistency.
Application should be performed in the ambient and substrate temperature ranging from +8 °C to +25 °C and the humidity below 80 %. This product should not be mixed with other plasters, pigments, resins and binders. The rooms where the material has been applied should be aired. In case of contact with eyes, they should be rinsed with water.
CERESIT CT 72 is used for making thin-layer plasters on external insulation systems. We recommend the application of the plaster CT 72 as a facade plaster within CERESIT ETICS (External Thermal Insulation Composite Systems) with the application of EPS-boards (Expanded Polystyrene boards) and mineral wool. CT 72 plaster is recommended to be applied on external walls where high permeabili
CERESIT CT 72 is used on external insulation systems, concrete substrates, traditional plasters, gypsum substrates and chipboards, gypsum cardboards, etc.
CERESIT CT 72 is present in CERESIT Ceretherm AERO WOOL System