Skip to Content

CERESIT CT 710 VISAGE NATURAL STONE - GRANITE

  • With a mix of natural and modified aggregates
  • Resistant to weather conditions and scrubbing
  • Possible application with stencils

Features and benefits

With sandstone or granite structure for indoor and outdoor use.

Properties

Description

CERESIT® CT 710 plaster is used for execution of decorative plasters on traditional plasters, concrete and gypsum surfaces, chipboards, drywall boards. CT 710 as facade plaster is one of the components within ETICS, CERESIT Ceretherm with application of expanded polystyrene boards and mineral wool. Available pack size: 20 kg.

Documents and downloads

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

CERESIT CT 710 DECORATIVE PLASTER MIXING AND SUBSTRATE PREPARATION

CERESIT CT 710 may be used on smooth, carrying, dry surfaces, free of substances which decrease adhesion. Uneven and damaged surfaces should be first smoothed and repaired. The existing soiling, low-strength layers, paint coats of elastic, lime and adhesive paints, wallpaper and remains of adhesives need to be completely removed. CT 710 may be applied after complete drying of CT 16.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

APPLICATION OF CERESIT CT 710 VISAGE

Mix the contents of the container with a slow-speed driller fitted with a basket stirrer to obtain uniform consistence. CERESIT CT 710 Granite should be applied manually, uniformly on the surface, until thickness is achieved which ensures complete coverage of the surface. Use a plastic float to smooth plaster and getting visible before its surface starts to dry out. The float should not be pressed too strongly to the surface. When set, CT 710 creates non-uniform natural stone structure. 

CERESIT Tiling CE60 LP Instructions Illustration Step 3

IMPORTANT TO NOTE WHEN USING CERESIT CT 710 VISAGE

Application should be performed in dry conditions, at air and surface temperature from +10 °C to +25 °C and with relative air humidity below 80 %. Do not apply plaster on highly insolated walls, and protect against too fast drying, against rainfall, direct sunlight and strong wind until it is completely hard. Do not mix the product with other resins, plasters, dyes and binding materials. 

Related how to guides

  • How to apply different types of plasters?
    How to apply different types of plasters?
  • How to apply architectural concrete plaster
    How to apply architectural concrete plaster?
  • Fix EPS insulation boards with adhesive mortar?
    How to fix EPS insulation boards with adhesive mortar?
  • Fix EPS insulation boards with PU adhesive?
    How to fix EPS insulation boards with PU adhesive?
  • How to repair mechanical damages in plastered insulation?
    How to repair mechanical damages in plastered insulation?
  • How to prepare the substrate for installation of the insulation layer
    How to prepare the substrate for installation of the insulation layer
  • Decorative plaster with visage stone effect
  • How to cope with bio contamination on facade

Related products

  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-16/SAP_0201IGC014E8/searchResult.productFields.MainImageAltText}
    CERESIT CT 16
    Dispersion of synthetic resins to prime the substrates for thin layer mineral, acrylic, silicate-silicone, silicone and elastomeric plasters. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-60-visage/SAP_0201IDC014K2/searchResult.productFields.MainImageAltText}
    CERESIT CT 60 VISAGE
    Decorative brick and stone effect plaster, recommended for clinker brick or natural stone stencils for indoor and outdoor use. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/product#/ceresit-ct-17/SAP_0201JAC014F1/searchResult.productFields.MainImageAltText}
    CERESIT CT 17
    Primer for surface strengthening of all absorbent substrates for indoor and outdoor application, prior to fixing ceramic tiles, pouring floors or fixing thermal insulation boards. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-720-visage/SAP_0201IEC014L0/searchResult.productFields.MainImageAltText}
    CERESIT CT 720 VISAGE
    Stylized plaster for modelling wooden structures for outdoor and indoor use. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-760-visage/SAP_0201IDC014L7/searchResult.productFields.MainImageAltText}
    CERESIT CT 760 VISAGE
    With the texture of architectural concrete for decorative facade coatings in ETICS for outdoor and indoor use. 

Frequently asked questions