- Recommended for stencils
- Low-absorbent and high-elasticity
- Resistant to damage and weather conditions
-
Recommended for stencils
-
Low-absorbent and high-elasticity
-
Resistant to damage and weather conditions
-
Vapour permeable
-
BioProtect formula - resistant to biological contamination
-
Colour stability
CERESIT® CT 60 is used for making building facades with the use of stencils which imitate clinker bricks or natural stones. As facade plaster, it is one of the components used within CERESIT Ceretherm ETICS with application of expanded polystyrene boards and mineral wool. It can be used on concrete surfaces, traditional cement plasters, gypsum surfaces, chipboards, drywall boards. In case of dark colours, application over additional heating systems should be limited to small areas. Available pack size: 25 kg
CERESIT CT 60 should be used on smooth, carrying, dry surfaces, free of grease, bitumen, dust and other substances which decrease adhesion. Uneven and damaged surfaces should be first smoothed and repaired. The existing soiling, low-strength layers and paint coats of elastic, lime and adhesive paints need to be completely removed. CT 60 may be applied after complete drying of CT 16 priming paint.
Stir thoroughtly the content of the container. Before application of the plaster, fix stencils on the surfaces. Apply CERESIT CT 60 0.5 uniformly on the surface. Texture is obtained right after application of the plaster by way of smoothing it with a steel long float or texturing. The stencils shall be removed after initial setting of the plaster gently puling the stencil down partially.
Application should be performed in dry conditions, at air and surface temperature from +5 °C to +25 °C and with relative air humidity below 80 %. Do not mix the product with other plasters, dyes, resins and other binding materials. Ventilate the rooms after application of plaster until odour is no longer perceived.
CERESIT CT 60 0.5 mm plaster is used with the use of stencils which imitate clinker bricks or natural stones. As facade plaster, it is one of the components used within CERESIT Ceretherm ETICS with application of expanded polystyrene boards and mineral wool.
CERESIT CT 60 can be used on concrete surfaces, traditional cement plasters, gypsum surfaces and chipboards, drywall boards, etc.
CERESIT CT 60 VISAGE is present in CERESIT Ceretherm VISAGE System