CERESIT CT 60 THERMOPROJECT ACRYLIC DECORATIVE PLASTER WITH SILICONE

CERESIT CT 60 THERMOPROJECT can be applied on smooth, carrying, dry and clean substrates free from grease, bitumen, dust and other substances decreasing adhesion. Uneven and damaged substrates should be first smoothed and repaired. The existing dirt, layers of low-strength, as well as elastic, lime and adhesive paint coatings should be removed. It can be applied when the priming paint CT 16 is completely dry.

CERESIT CT 60 THERMOPROJECT should be evenly applied on the substrate at the thickness of the grain by means of a steel long float held at the angle. Then, it should be given homogenous structure with round movements by means of a plastic long float flatly held to achieve the appearance densely laid out aggregate grains structure. Work should be done on one surface without breaks, keeping the same product consistency. 

Application should be performed in the ambient and substrate temperature ranging from +5 °C to +25 °C and the humidity below 80 %. This product should not be mixed with other plasters, pigments, resins and binders. The rooms where the material has been applied should be aired. In case of contact with eyes, they should be rinsed with water and the general practitioner should be consulted.