Skip to Content

CERESIT CT 177 MOSAIC

  • High decorative values
  • Resistant to weather conditions and to scrubbing
  • With high-impact strength

Features and benefits

Decorative thin-layer plaster for indoor and outdoor applications. Mosaic plaster, grain size 0-6 mm.

Properties

Description

CERESIT® CT 177 is used for making decorative, colourful plaster coatings on traditional plasters, concrete and gypsum substrates, on chipboard, plasterboard. The binder is transparent resins and the fillers are coloured quartz pebbles. After setting, a colourful render is obtained. CT 177 is recommended for use on walls exposed to abrasion and dirt inside buildings. Outside buildings, it is recommended for use on surfaces subject to rapid soiling. Available pack size: 25 kg.

Documents and downloads

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

CERESIT CT 177 PLASTER MIXING AND SUBSTRATE PREPARATION

CERESIT CT 177 can be applied to even, load-bearing, colour-uniform, dry and free from substances that reduce adhesion substrates. The substrate must be sound, dry, clean and free from agents that impair the adhesion of subsequent layers. Old paint coatings of low resistance, wallpaper or any soiling should be removed. CT 177 can be applied after the quartz primer CT 16 has dried completely.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

APPLICATION OF CERESIT CT 177

Immediately before use, stir the contents of the container with a slow-speed drill with a basket mixer until a homogeneous consistency. Apply the plaster mass evenly with a stainless steel trowel in a layer min. 5 times the thickness of the grain. Subsequent layers should be applied wet-on-wet and smoothed. On one surface work without technological break, maintaining uniform consistency of the material. 

CERESIT Tiling CE60 LP Instructions Illustration Step 3

IMPORTANT TO NOTE WHEN USING CERESIT CT 177

The works should be carried out in dry conditions, at the temperature of air and substrate from +10°C to +25°C and relative humidity of air below 80%. Freshly after application, plaster CERESIT CT 177 has a milky colour, which disappears as it dries. With prolonged contact with water, it may temporarily return, until the surface dries again. Avoid using CT 177 plaster in areas exposed to prolonged dampness. 

Related how to guides

  • How to apply different types of plasters?
    How to apply different types of plasters?
  • How to apply architectural concrete plaster
    How to apply architectural concrete plaster?
  • Fix EPS insulation boards with adhesive mortar?
    How to fix EPS insulation boards with adhesive mortar?
  • Fix EPS insulation boards with PU adhesive?
    How to fix EPS insulation boards with PU adhesive?
  • How to repair mechanical damages in plastered insulation?
    How to repair mechanical damages in plastered insulation?
  • How to prepare the substrate for installation of the insulation layer
    How to prepare the substrate for installation of the insulation layer
  • Decorative plaster with visage stone effect
  • How to cope with bio contamination on facade

Related products

  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-16/SAP_0201IGC014E8/searchResult.productFields.MainImageAltText}
    CERESIT CT 16
    Dispersion of synthetic resins to prime the substrates for thin layer mineral, acrylic, silicate-silicone, silicone and elastomeric plasters. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/product#/ceresit-ct-17/SAP_0201JAC014F1/searchResult.productFields.MainImageAltText}
    CERESIT CT 17
    Primer for surface strengthening of all absorbent substrates for indoor and outdoor application, prior to fixing ceramic tiles, pouring floors or fixing thermal insulation boards. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-thermo-universal/SAP_0201IAC015R0/searchResult.productFields.MainImageAltText}
    CERESIT THERMO UNIVERSAL
    Reinforcing Rendering Mortar - Basic coating XPS, EPS, MW. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-710-visage/SAP_0201IDC014K7/searchResult.productFields.MainImageAltText}
    CERESIT CT 710 VISAGE
    With sandstone or granite structure for indoor and outdoor use. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-77/SAP_0201IDC014L8/searchResult.productFields.MainImageAltText}
    CERESIT CT 77
    Decorative thin-layer plaster for indoor and outdoor applications. Mosaic plaster grain 1,0-1,6 mm or 1,4-2,0 mm. 

Frequently asked questions