Skip to Content

CERESIT CR 55 RENOVATION SOL-SILICATE PAINT

  • Universal on mineral and polymeric based substrates
  • Very high vapor permeability
  • Hydrophobic

Features and benefits

Sol-silicate renovation paint formulated with hybrid silicate binder

Properties

Description

CERESIT® CR 55 is formulated with hybrid silicate binder that ensures unique physical and chemical properties, excellent parameters and long-term durability, without changing the technical and aesthetic parameters of the finish during the use cycle. CR 55 is dedicated to be used outdoor and indoor, especially recommended for protecting of coated areas against weathering, biological corrosion and where high durability and dirt-resistance. Available pack size: 15 l and 3,5 l

Documents and downloads

How to use

CERESIT CR 55 SUBSTRATE PREPARATION

CERESIT CR 55 may be applied on carrying, smooth, dry and clean substrates. Firstly uneven and damaged substrates should be repaired. It is recommended to check the strength of the existing mineral layers. The existing dirt, layers of low strength, lime and adhesive paint coatings, residuals of wall paper or glues should be completely removed. After being washed with water, the substrate should dry.

APPLICATION OF CERESIT CR 55

Before the paint application, the content of the container should be carefully stirred by means of the drill with a mixer for about 2 minutes. Usually it is sufficient to paint twice. Between the application of the subsequent layers at least 12-to 24-hour technological breaks should be maintained. CR 55 should be applied by means of a brush, roller or a spray device. It is important to apply the paint evenly. Application with spray machine using pressure machines is feasible. If there is such a need, it is possible to add not more than 5% of water and stir carefully 

IMPORTANT TO NOTE WHEN USING CERESIT CR 55

Application should be performed in dry conditions with the ambient and substrate temperature ranging from +5 °C to +25 °C and the humidity below 80 %. The paint may cause discoloration impossible to be removed, therefore all the elements in contact with CR 55 should be protected. Skin and eyes should be protected. Protective gloves and glasses should be worn while applying the paint. 

Related how to guides

  • How to apply different types of plasters?
    How to apply different types of plasters?
  • How to apply architectural concrete plaster
    How to apply architectural concrete plaster?
  • Fix EPS insulation boards with adhesive mortar?
    How to fix EPS insulation boards with adhesive mortar?
  • Fix EPS insulation boards with PU adhesive?
    How to fix EPS insulation boards with PU adhesive?
  • How to repair mechanical damages in plastered insulation?
    How to repair mechanical damages in plastered insulation?
  • How to prepare the substrate for installation of the insulation layer
    How to prepare the substrate for installation of the insulation layer
  • Decorative plaster with visage stone effect
  • How to cope with bio contamination on facade

Related products

  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-cr-50/SAP_0201IFC019R6/searchResult.productFields.MainImageAltText}
    CERESIT CR 50
    Silicone renovation paint for outdoor and indoor usage 
  • ${/content/heliux/adhesive/ceresit/com/en/products/mortars-and-auxiliaries/product#/ceresit-cr-64/SAP_0201VNC014C2/searchResult.productFields.MainImageAltText}
    CERESIT CR 64
    Finishing layer of the renovation façade system 

Frequently asked questions