CERESIT CT 16 QUARZ CONTACT

Improves the adhesion between ETICS system layers

Low absorbency and vapour permeability

Easier application of plasters

Find a retailer

Features and benefits
Documents and downloads
How to use
Related how to guides
Related products
Frequently asked questions

Features and benefits

Dispersion of synthetic resins to prime the substrates for thin layer mineral, acrylic, silicate-silicone, silicone and elastomeric plasters.

Properties

Improves the adhesion between ETICS system layers
Low absorbency and vapour permeability
Easier application of plasters
Perfect final effect of the finishing layer
Ready to use, can be applied with roller or brush
High opacity

Description

CERESIT® CT 16 facilitates the application of thin-layer plasters and renderings inside and outside the buildings. It is recommended for priming the reinforced layers within CERESIT Ceretherm ETICS and traditional plasters. CT 16 can be applied to the surfaces of chipboards, gypsum cardboards, gypsum plasters, all types of concrete and strong paint coats. Available pack size: 10 l

Documents and downloads

TDS (1)

CERESIT CT 16

en_GL | application/pdf

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

CERESIT CT 16 SUBSTRATE PREPARATION

The substrates to be coated with the paint CERESIT CT 16 should be smooth, even, dry and free from any substances that decrease adhesion: grease, bitumen, dust, etc. The absorptive substrates, e.g. gypsum plasters, chipboards, non-impregnated gypsum cardboards should be primed with the agent CERESIT CT 17 and then left for drying for approx. 2 hours.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

APPLICATION OF CERESIT CT 16

The content of the packing should be stirred. Neither rusty containers nor tools should be used. Do not dilute the paint! There is recommended to apply one even layer CERESIT CT 16 using roller or brush. Drying time is approx. 3 hours. Tools and fresh stains should be washed with water.

CERESIT Tiling CE60 LP Instructions Illustration Step 3

CERESIT CT 16 PRIMER - ADHERENCE AND WEATHER CONDITIONS

The priming paint should be applied in the ambient temperature and that of the substrate from +5 °C to +25 °C and the humidity below 80 %. In case of contact with eyes, they should be rinsed with water and a general practitioner should be consulted.

Related how to guides

How to apply different types of plasters?
How to apply architectural concrete plaster?
How to fix EPS insulation boards with adhesive mortar?
How to fix EPS insulation boards with PU adhesive?
How to repair mechanical damages in plastered insulation?
How to prepare the substrate for installation of the insulation layer
Decorative plaster with visage stone effect
How to cope with bio contamination on facade

View all

Related products

$${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-174/SAP_0201IDC014F2/searchResult.productFields.MainImageAltText}$

CERESIT CT 174

Decorative thin layer plaster for indoor and outdoor applications, stone like structure, grain 1.5 mm or 2 mm.
$${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/product#/ceresit-ct-17/SAP_0201JAC014F1/searchResult.productFields.MainImageAltText}$

CERESIT CT 17

Primer for surface strengthening of all absorbent substrates for indoor and outdoor application, prior to fixing ceramic tiles, pouring floors or fixing thermal insulation boards.
$${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/product#/ceresit-ct-99/SAP_0201JAC014N6/searchResult.productFields.MainImageAltText}$

CERESIT CT 99

Renovation concentrate for removing fungi, lichens, moss and bacterial contamination, suitable for indoor and outdoor areas.
$${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/product#/ceresit-ct-29/SAP_0201JDC014G9/searchResult.productFields.MainImageAltText}$

CERESIT CT 29

Grey, mineral filler to repair traditional plasters and thin-layer “putties” inside and outside the buildings.
$${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-85/SAP_0201IAC014M9/searchResult.productFields.MainImageAltText}$

CERESIT CT 85

For fixing Expanded Polystyrene (EPS) boards as well as for applying a thin armoured layer for thermal insulation of buildings by means of light wet method.
$${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-175/SAP_0201IDC014F4/searchResult.productFields.MainImageAltText}$

CERESIT CT 175

Decorative thin-layer plaster for indoor and outdoor applications, woodworm like structure, grain 2 mm.
$${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-74/SAP_0201IDC014L4/searchResult.productFields.MainImageAltText}$

CERESIT CT 74

Decorative thin-layer plaster for indoor and outdoor applications, stone structure, grain 1.5, 2.0 or 2.5 mm
$${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-35/SAP_0201IEC014H8/searchResult.productFields.MainImageAltText}$

CERESIT CT 35

Decorative thin layer plaster for indoor and outdoor applications. Mineral plaster, woodworm lilke structure, grain 2.5 mm or 3.5 mm.
$${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-76/SAP_0201IDC014L6/searchResult.productFields.MainImageAltText}$

CERESIT CT 76

Decorative thin-layer plaster with increased UV protection for indoor and outdoor applications. Stone like structure with grane size of 1.5 mm or 2 mm.
$${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-190/SAP_0201IAC014F9/searchResult.productFields.MainImageAltText}$

CERESIT CT 190

For fixing Mineral Wool boards as well as for applying a thin-armoured layer for thermal insulation of buildings in ETICS systems.
$${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-110/SAP_0201IFC016D2/searchResult.productFields.MainImageAltText}$

CERESIT CT 110

Solar Protect facade paint is an optimal combination of state of the art ingredients, which provide outstanding performance and resistance.
$${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-thermo-universal/SAP_0201IAC015R0/searchResult.productFields.MainImageAltText}$

CERESIT THERMO UNIVERSAL

Reinforcing Rendering Mortar - Basic coating XPS, EPS, MW.
$${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-60/SAP_0201IDC014K0/searchResult.productFields.MainImageAltText}$

CERESIT CT 60

Decoractive thin layer plaster with stone structure and grain size of 1.5 mm, 2.0 mm or 2.5 mm for indoor and outdoor applications.
$${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-80/SAP_0201IAC014M1/searchResult.productFields.MainImageAltText}$

CERESIT CT 80

For fixing Expanded Polystyrene boards, XPS and mineral wool boards as well as for applying a thin-reinforced layer for thermal insulation of buildings by means of ETICS.

Find a retailer

Frequently asked questions

CERESIT CT 16 facilitates the application of thin-layer plasters and renderings inside and outside the buildings. It is recommended for priming the reinforced layers within CERESIT Ceretherm ETICS and traditional plasters.

CERESIT CT 16 can be applied to the surfaces of chipboards, gypsum cardboards, gypsum plasters, all types of concrete and strong paint coats.

CERESIT CT 16 is present in CERESIT POPULAR System, AQUASTATIC System, SELF CLEAN System, SOLAR PROTECT System, IMPACTUM System, VISAGE System

CERESIT CT 16 QUARZ CONTACT

Features and benefits

Properties

Description

Documents and downloads

How to use

CERESIT CT 16 SUBSTRATE PREPARATION

APPLICATION OF CERESIT CT 16

CERESIT CT 16 PRIMER - ADHERENCE AND WEATHER CONDITIONS

Related how to guides

Related products

Decorative thin layer plaster for indoor and outdoor applications, stone like structure, grain 1.5 mm or 2 mm.

Primer for surface strengthening of all absorbent substrates for indoor and outdoor application, prior to fixing ceramic tiles, pouring floors or fixing thermal insulation boards.

Renovation concentrate for removing fungi, lichens, moss and bacterial contamination, suitable for indoor and outdoor areas.

Grey, mineral filler to repair traditional plasters and thin-layer “putties” inside and outside the buildings.

For fixing Expanded Polystyrene (EPS) boards as well as for applying a thin armoured layer for thermal insulation of buildings by means of light wet method.

Decorative thin-layer plaster for indoor and outdoor applications, woodworm like structure, grain 2 mm.

Decorative thin-layer plaster for indoor and outdoor applications, stone structure, grain 1.5, 2.0 or 2.5 mm

Decorative thin layer plaster for indoor and outdoor applications. Mineral plaster, woodworm lilke structure, grain 2.5 mm or 3.5 mm.

Decorative thin-layer plaster with increased UV protection for indoor and outdoor applications. Stone like structure with grane size of 1.5 mm or 2 mm.

For fixing Mineral Wool boards as well as for applying a thin-armoured layer for thermal insulation of buildings in ETICS systems.

Solar Protect facade paint is an optimal combination of state of the art ingredients, which provide outstanding performance and resistance.

Reinforcing Rendering Mortar - Basic coating XPS, EPS, MW.

Decoractive thin layer plaster with stone structure and grain size of 1.5 mm, 2.0 mm or 2.5 mm for indoor and outdoor applications.

For fixing Expanded Polystyrene boards, XPS and mineral wool boards as well as for applying a thin-reinforced layer for thermal insulation of buildings by means of ETICS.

Frequently asked questions

What is the field of application of CERESIT CT 16?

On what kind of substrates CERESIT CT 16 is suitable to be applied?

Which are the main systems in which CERESIT CT 16 is present?