- Exceptionally durable and resistant to soiling
- Resistant to weather conditions
- Hydrophobic
-
Exceptionally durable and resistant to soiling
-
Resistant to weather conditions
-
Hydrophobic
-
High-stability of colour
-
Ready-to-use
-
Available in 6 natural wood colours
CERESIT® CT 721 impregnate is used for executing a decorative layer with natural wood colours on the surface of CERESIT CT 720, thin-layer mineral plasters, traditional plasters, concrete and gypsum surfaces. CT 721 impregnate is one of the components used in the external thermal insulation composite CERESIT Ceretherm Visage system for building walls (ETICS) with application of expanded polystyrene boards and mineral wool boards. The impregnate features exceptional durability and resistance to soiling. Available pack size: 4 l
CERESIT CT 721 may be used on carrying, dry surfaces, free of substances which decrease adhesion. Moisture pressure from the surface may result in plaster damage, therefore the places exposed to permanent moistness should be provided with appropriate sealing layers.
Before use, mix thoroughly the contents of the container. Additionally, make quick mixing movements during application. Do not mix longer than 1 min. Do not use rusty containers or tools. Apply the impregnation agent in at least two layers wet on wet. CERESIT CT 721 may be sprayed or applied with brush, roller or sponge.
Application should be performed in dry conditions, at air and surface temperature from +5 °C to +25 °C and with relative air humidity below 80 %. The impregnate plaster should be protected against rainfall until it is completely dry. When material comes into contact with the eyes, rinse the eyes with plenty of water and seek medical advice.
CERESIT CT 721 impregnate is used for executing a decorative layer with natural wood colours. It is one of the components used in the external thermal insulation composite CERESIT Ceretherm Visage system for building walls (ETICS) with application of expanded polystyrene boards and mineral wool boards.
CERESIT CT 721 is used on the surface of CERESIT CT 720 VISAGE ‘Wood’ Plaster, thin-layer mineral plasters, traditional plasters, concrete and gypsum surfaces.
CERESIT CT 721 VISAGE is present in CERESIT Ceretherm VISAGE System