- Self-cleaning and dirt-resistant
- Low-water absorption and high vapour permeability
- Tixotropic
-
Self-cleaning and dirt-resistant
-
Low-water absorption and high vapour permeability
-
Tixotropic
-
Highly durable, crack-bridging and high-elasticity
-
Highly resistant to UV and weather conditions
-
BioProtect formula – resistant to fungi, algae, mould
CERESIT® CT 49 nano-silicone paint is made of selected modified silicone, polysiloxane resins and special fillers and pigments. The coat is highly permeable to water vapour, but absorption of water and dirt is strongly limited. It can be used on the mineral substrates that have never been painted before and for painting CERESIT. It is highly recommended in historical objects, on the renovation and aerated plasters, where aesthetic qualities and duration of the coating is required. Available pack size: 15 l
CERESIT CT 49 application should be performed in dry conditions with the ambient and substrate temperature ranging from +5 °C to +25 °C and the. Firstly uneven and damaged substrates should be repaired. It existing dirt, layers of low strength, lime and adhesive paint coatings as well as the residuals of wall paper or glues should be completely removed. After being washed with water, the substrate should be dry.
Before the paint application, the content of the container should be carefully stirred by means of a drill with a mixer for about 2 minutes. Between the application of the subsequent layers at least 12- to 24-hour technological breaks should be maintained. CERESIT CT 49 should be applied evenly by means of a brush, roller or a spray device.
Application should be performed in dry conditions with the ambient and substrate temperature ranging from +5 °C to +25 °C and the humidity below 80 %. The paint may cause discoloration impossible to be removed on glass, ceramic, wooden, metal and stone surfaces. Skin and eyes should be protected. Protective gloves and glasses should be worn while applying the paint.
CERESIT CT 49 is used outdoor and indoor, for buildings’ façades and interiors. For use in areas open for biological contamination (fungi, algae, etc.). It can be applied on the mineral substrates (concrete, cement plasters, lime–cement plasters and lime plasters) that have never been painted before.
CERESIT CT 49 can be applied on the mineral substrates: concrete, cement plasters, lime–cement and lime plasters, gypsum.
CERESIT CT 49 is present in CERESIT Ceretherm SELF CLEAN System