Skip to Content

CERESIT CP 30 Aquablock - Silicone waterproofing coating - Elastic one-component thin-layer silicone rubber for roof waterproofing

  • UV-resistant and weatherproof
  • Waterproof and vapor permeable
  • Permanently flexible at low temperatures

Features and benefits

Solvent-free, ready-to-use silicone rubber thick coating for the seamless and crack-bridging substrate protection and waterproofing of roof areas. Suitable for zero slope roofs.

Properties

Description

CERESIT® CP 30, used for quick repairs of flat and pitched roofs as well as for permanent waterproofing of flat roofs as a finishing coat. Suitable for mineral substrates - concrete, screed, fiber cement boards, roof tiles, bituminous substrates (roofing membranes and coatings), acrylic roof coatings, metal coatings (copper, zinc, aluminum, stainless steel, brass), plastic (ventilation pipes connection, drains or skylight frames), thermal insulation layers (PU foam, EPS) and wood materials (OSB, chipboard, solid wood).Available pack size: 1 kg, 5 kg

Documents and downloads

How to use

CERESIT CP 30 AQUABLOCK SUBSTRATE PREPARATION

Absorbent substrates: Mineral substrates and wood have to be cleaned mechanically. Mechanically remove algae and lichen as well as loose particles and coatings. Bitumen: Thoroughly remove any loose stone chips and sand as well as the weather-worn bitumen. After that, prime the substrate with CERESIT CP 29 Aquablock Primer. Metals: Completely remove any oxide layers (patina) and clean with a solvent-based cleaner e.g. spirit. A priming coat is not required. Plastic materials: After mechanical roughening clean the plastic materials with a solvent-based cleaner, e.g. spirit. Then pretreat with CERESIT CP 29 Aquablock Primer.PUR / EPS board: Very smooth substrates have to be roughened slightly and after cleaning the grinding dust CERESIT CP 29 Aquablock Primer must be applied before CERESIT CP 30.

APPLICATION OF CERESIT CP 30 COATING

CERESIT CP 30 Aquablock Coating is ready-to-use and can be applied directly by means of a paint brush, roller, ceiling brush or by using the airless spraying technique. CP 30 Aquablock can be used for 3 types of coating application: Substrate protection - UV resistence - 1-1,5mm layer. Sealing coat - Soak a short-pile roller in CP 30 Aquablock Coating and roll the fleece down into the first coat so that it is fully embedded. Wait until the first layer has fully dried (waiting time approx. 24 hours, depending on the weather) before applying the second coat. Walkaways for roof inspection and maintenance - It is recommended to use a contrasting color for these areas and a layer thickness of 0 mm. Sprinkle quartz sand (e.g. grit 0.1– 0.4 mm) into the fresh top coat of the service walkways to prevent slipping. 

IMPORTANT TO NOTE WHEN USING CERESIT CP 30 AQUABLOCK

Use CERESIT CP 30 Aquablock Coating only in dry weather with material and air temperatures of +10 °C to +30 °C and below 75% relative air humidity. The substrate temperature must be between +5 °C and +50 °C. When working in cold weather, make sure that the substrate temperature is at least 3 °C above the thaw point; otherwise a separating moisture film will form. Do not use CP 30 Aquablock Coating on transparent plastics (e.g. Plexiglas®, Makrolon®, PETG) used e.g. for domelights/skylights. 

Related how to guides

  • Horizontal barrier under foundation wall
  • Concrete structures protection with mineral waterproofing slurries

Related products

  • ${/content/heliux/adhesive/ceresit/com/en/products/flooring/product#/ceresit-r-766/SAP_0201TNC015M1/searchResult.productFields.MainImageAltText}
    CERESIT R 766
    For absorbent and non-absorbent substrates, ensuring the adhesion of self-levelling compounds or repair mortars to the substrate. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/waterproofing/product#/ceresit-cp-27/SAP_0201WRC014B2/searchResult.productFields.MainImageAltText}
    CERESIT CP 27
    Multi-purpose waterbased silicone sealant which adheres to most common building substrates. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/waterproofing/product#/ceresit-cp-43/SAP_0201WDC014B5/searchResult.productFields.MainImageAltText}
    CERESIT CP 43
    Fiber-reinforced bitumen waterproofing coat for the full-substrate waterproofing suitable for all water load types. Quickly rainproof and rapidly dries to produce a flexible, crack-bridging waterproofing layer. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/waterproofing/product#/ceresit-cr-90/SAP_0201WHC014C8/searchResult.productFields.MainImageAltText}
    CERESIT CR 90
    For waterproofing buildings and structural components forms a waterproofing layer on the substrate of the substrates and additionally, during the structure exploitation, it builds crystals in the substrate pores. 

Frequently asked questions