Skip to Content

CERESIT CS 42 MARBLE JOINT SILICONE

  • Antifungal
  • UV-, ageing- and weather-resistant
  • Waterproof

Features and benefits

Silicone for sealing connection & expansion joints in natural stone & marble coverings, suitable for indoor and outdoor application.

Properties

Description

CERESIT® CS 42 Marble Joint Silicone seals joints between building elements made of brickwork, concrete and tile coverings and is used for expansion joints in natural stone and marble coverings made of granite, limestone, quartzite, travertine, shell marl, sandstone, limestone tiles and Carrara marble. Adheres without priming coat to polyester, porcelain, wood and tiles. Not suitable for use on surfaces in contact with food and in drinking water tanks.Available size: 300 ml

Documents and downloads

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

SUBSTRATE PREPARATION FOR APPLICATION OF CERESIT CS 42

Joint flanks must be dry, sound, clean and free from substances which may impair adhesion (e.g. oil, grease, old sealant). Screw the nozzle on and cut it off at an angle to match the joint width and fill the sealant into the joint.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

APPLICATION OF CERESIT CS 42

CERESIT CS 42 is supplied ready-to-use and can be applied from the original packaging with no special pre-treatment. 

CERESIT Tiling CE60 LP Instructions Illustration Step 3

HANDLING AFTER THE APPLICATION OF CERESIT CS 42

Areas soiled with fresh sealant may be cleaned with a dry pad or a pad soaked in a solvent. Any cured sealant can be removed by scraping (e. g. using a razor blade) or by using a special silicone remover product. 

Related how to guides

  • Chemical anchor in hollow masonry
  • Chemical anchor in concrete

Related products

  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/product#/ceresit-ce-40/SAP_0201SGC013M9/searchResult.productFields.MainImageAltText}
    CERESIT CE 40
    Water-resistant, flexible, grout mortar for porcelain, ceramic, glass, natural stones and marble tiles from 1 up to 8 mm width. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/product#/ceresit-ce-42/SAP_0201SHC013N0/searchResult.productFields.MainImageAltText}
    CERESIT CE 42
    Rapid hardening grouting mortar for bright, translucent marble, natural stones & agglo of joint width 1 to 8 mm. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/product#/ceresit-ce-43/SAP_0201SGC013N1/searchResult.productFields.MainImageAltText}
    CERESIT CE 43
    Mechanical and water-resistant grout mortar for joints of 1 to 20 mm width, suitable for heated floors and balconies. Perfect for high-traffic areas and wide joints. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/product#/ceresit-cm-42/SAP_0201SCC013W8/searchResult.productFields.MainImageAltText}
    CERESIT CM 42
    Natural stone adhesive mortar based on white cement with Trass for wall and floor coverings, for layers up to 10 mm thickness. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/product#/ceresit-cm-42-express/SAP_0201SCC013W9/searchResult.productFields.MainImageAltText}
    CERESIT CM 42 EXPRESS
    Fast setting and white tile adhesive with Trass for all natural stones, suitable for indoors and outdoors. 

Frequently asked questions