-
Optimal hardness and elasticity
-
High strength
-
Machine application possible
-
Easy to grind
-
No delamination
-
Layer thickness up to 5mm.
CERESIT® IN 45 finish skim coat is used to make white and smooth wall and ceiling surfaces to be finished with paint coats and wallpapers. Thanks to the use of the SMART POLYMER Technology, a perfectly smooth and resistant surface can be achieved. CERESIT IN 45 has excellent adhesion to gypsum substrates, plasterboards, aerated concrete, cement and cement-lime plasters. It can also be applied on concrete substrates.Available pack size: 3 kg, 10 kg and 20 kg
CERESIT IN 45 can be applied on load-bearing substrates that are dry and free from grease, bitumen, dust, loose plaster grains and other substances decreasing adhesion.
The content of the package should be poured to a precisely measured amount of clean, cool water and stirred using a drill with a mixer until it forms a homogeneous mixture, free of lumps. Leave for approximately 5 min. and then stir the mixture again.
The material shall be applied on the surface with a metal float. After application, the material shall be smoothed using a wide stainless steel float and left to dry. After the hardening of the material, the surface is ready for smoothing with sandpaper or a grinding mesh and a so-called giraffe grinder.
CERESIT IN 45 has excellent adhesion to gypsum substrates, plasterboards, aerated concrete, cement and cement-lime plasters. It can also be applied on concrete substrates.
Finish skim coat CERESIT IN 45 is used to make white and smooth wall and ceiling surfaces to be finished with paint coats and wallpapers.
Works should be carried out in dry conditions, with air and ground temperature ranging from +5 °C to +23 °C.