Skip to Content

CERESIT IN 35 START + FINISH

  • Machine application possible
  • Easy to grind
  • Layer thickness up to 10 mm

Features and benefits

Gypsum-based rendering skim coat for filling defects on wall and ceiling surfaces for skimming surfaces finished with paint coats and wallpapers and for joining plasterboards with tape.

Properties

Description

CERESIT® IN 35 gypsum-based rendering skim coat is perfectly suitable for filling cracks, scratches and cavities on wall and ceiling surfaces. Thanks to InSure technology the material also enables to achieve smooth and durable surface which is suitable to be used under any types of paint coats. In addition, the material forms a solid and stable substrate for papering. Available pack size: 3 kg, 10 kg and 20 kg

Documents and downloads

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

SUBSTRATE PREPARATION FOR APPLICATION OF CERESIT IN 35

CERESIT IN 35 can be applied on load-bearing substrates that are dry and free from grease, bitumen, dust, loose plaster grains and other substances decreasing adhesion.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

MIXING OF CERESIT IN 35

The content of the package should be poured to a precisely measured amount of clean, cool water and stirred using a drill with a mixer until it forms a homogeneous mixture, free of lumps. Leave for approximately 5 min. and then stir the mixture again. 

CERESIT Tiling CE60 LP Instructions Illustration Step 3

APPLICATION OF CERESIT IN 35

CERESIT IN 35 should be carefully applied – put-press it to fill the joint thoroughly. Then embed the tape (paper or fleece). If using paper tape, wet it before placing. When the first layer of IN 35 is already bound, apply a second, wider layer of the IN 35 skim coat. Do not use self-adhesive fiberglass mesh. 

Related how to guides

  • Priming for skim coats

Related products

  • ${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/product#/ceresit-ct-17/SAP_0201JAC014F1/searchResult.productFields.MainImageAltText}
    CERESIT CT 17
    Primer for surface strengthening of all absorbent substrates for indoor and outdoor application, prior to fixing ceramic tiles, pouring floors or fixing thermal insulation boards. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/product#/ceresit-ct-127/SAP_0201JFC014E2/searchResult.productFields.MainImageAltText}
    CERESIT CT 127
    Finish skim coat for final smoothing, suitable foe indoor and dry areas, free of permanent humidity. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/product#/ceresit-in-45/SAP_0201JFC015A3/searchResult.productFields.MainImageAltText}
    CERESIT IN 45
    White gypsum finishing coat to be used as the final finishing layer under paint coats and wallpapers. 

Frequently asked questions