-
High ultimate resistance
-
For indoor and outdoor use
-
Horizontal and vertical areas
-
Fast setting
CERESIT® RS 88 is a cementitious mortar for the renewal of concrete surfaces. Consistency can be adjusted from thick to liquid by varying the water dosage. Ideal for the improvement of concrete floors, holes and hollows filling, levelling work on ladders, podiums and ramps, as well as to cover and fill concrete surfaces.Available pack size: 25 kg
Substrates must be clean, free from structural defects, firm, dry and free of substances which may impair adhesion.
CERESIT RS 88 must be prepared in a bucket with clean water (5.5-6.5 litres/25 kg bag). Mix well in order to avoid lumps.
Apply the product at the right thickness using the mortar. Avoid quick drying and direct exposure to sunlight. At low temperatures, the workability and the drying time will increase. In order to apply in thicknesses higher than 10 mm, add 30% sand (7.5 kg/bag of RS 88) with a grain of < 4 mm. No additional water is required when adding sand.
Consistency can be adjusted from thick to liquid by varying the water dosage.
Ideal for the improvement of concrete floors, holes and hollows filling, levelling work on ladders, podiums and ramps, as well as to cover and fill concrete surfaces.
The temperature of the substrate on which the screed is applied should not be higher than 15 °C and the room temperature should not be higher than 18 °C with a relative humidity of up to 75%.