Skip to Content
Recent searches
      FIND STORE

      CERESIT DA

      • For indoor use
      • Good strength values
      • Easy application
      Find a retailer

      Features and benefits
      Levelling compound for layers of 0.5 to 10 mm in one single application, suitable for dry indoor areas.

      Properties
      • For indoor use
      • Good strength values
      • Easy application
      • Reduced consumption
      • Self-levelling and pumpable

      Description

      CERESIT® DA is a very low-emission floor levelling compound for producing norm-conforming substrates that are ready to receive floor covering. CERESIT DA can be used on suitable: mineral screeds, tiles and slabs, concrete and natural stones and terrazzo. Only use in dry indoor areas. Do not use CERESIT DA as a screed or wearing surface. Do not use on mastic asphalt screeds. CERESIT DA meets the highest requirements for indoor air quality and environmental compatibility.Available pack size: 25 kg

      Documents and downloads

      TDS (1)

      How to use
      CERESIT Tiling CE60 LP Instructions Illustration Step 1

      SUBSTRATE PREPARATION FOR APPLICATION OF CERESIT DA

      Fill the pre-defined amount of clean water into a clean mixing vessel and then add CERESIT DA.
      CERESIT Tiling CE60 LP Instructions Illustration Step 2

      MIXING OF CERESIT DA

      Mix with a suitable stirrer for approx. 2 minutes until the mixture is free of lumps. 
      CERESIT Tiling CE60 LP Instructions Illustration Step 3

      APPLICATION OF CERESIT DA

      Apply the levelling compound in the required layer thickness using a screed rake or smoothing trowel. CERESIT DA can be applied by machine. 

      Related how to guides
      • How to prepare floor for self levelling compound application
      • How, when and why use primers in flooring jobs
      View all

      Related products
      • ${/content/heliux/adhesive/ceresit/com/en/products/flooring/product#/ceresit-r-777/SAP_0201TNC015M2/searchResult.productFields.MainImageAltText}
        CERESIT R 777
        Dispersion primer for absorbent screeds and concrete floors, suitable for directly bonding floor coverings. 
      • ${/content/heliux/adhesive/ceresit/com/en/products/flooring/product#/ceresit-r-740/SAP_0201TNC015L9/searchResult.productFields.MainImageAltText}
        CERESIT R 740
        One-component PUR fast barrier primer for absorbent and impervious substrates, suitable for highly absorbent substrates. 
      • ${/content/heliux/adhesive/ceresit/com/en/products/flooring/product#/ceresit-cn-94/SAP_0201TNC014A4/searchResult.productFields.MainImageAltText}
        CERESIT CN 94
        Special primer for reliable bonding of floor levelling compounds, ceramic and natural stones on critical surfaces. 
      • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/product#/ceresit-cm-17/SAP_0201SBC013W2/searchResult.productFields.MainImageAltText}
        CERESIT CM 17
        Premium, flexible tile adhesive with high adhesive strength for all kind of tiles on difficult substrates and for large tiles. 
      • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/product#/ceresit-cl-51/SAP_0201SKC013R0/searchResult.productFields.MainImageAltText}
        CERESIT CL 51
        Flexible one-component sealing film for application under tiles and slabs, suitable for domestic wet areas indoors. 
      • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/product#/ceresit-cm-17-pro/SAP_0201SBC016H5/searchResult.productFields.MainImageAltText}
        CERESIT CM 17 PRO
        Highly elastic adhesive mortar reinforced with fibres, suitable for indoor and outdoor application and for tiles of any size. 
      • ${/content/heliux/adhesive/ceresit/com/en/products/flooring/product#/ceresit-r-766/SAP_0201TNC015M1/searchResult.productFields.MainImageAltText}
        CERESIT R 766
        For absorbent and non-absorbent substrates, ensuring the adhesion of self-levelling compounds or repair mortars to the substrate. 
      Find a retailer

      Frequently asked questions

        Only use CERESIT DA in dry indoor areas.

        CERESIT DA can be used on suitable: mineral screeds, tiles and slabs, concrete and natural stones and terrazzo.

        Only carry out floor installation work if the floor temperature is above 23 °C and relative humidity below 50 %.
      Find Store

      © 2024 HENKEL AG & CO. KGAA
      Recent searches