Skip to Content

CERESIT CM 29 MULTI EXPRESS

  • Walkable already after 2-3 hours
  • Suitable for large format tiles
  • Fast drying and hardening time

Features and benefits

Fast-setting tile adhesive for indoor and outdoor use for quick installation with fast work in progress.

Properties

Description

CERESIT® CM 29 MULTI XPRESS is used for the high-strength, void-free installation of ceramic tiles and slabs, both indoors and outdoors, using the thin-, medium- or thick-bed method (20mm). CM 29 MULTI XPRESS sets rapidly. It can also be used for bonding large-tiles and slabs, and discoloration-proof installation of non-translucent natural stones.Available pack size: 25 kg.

Documents and downloads

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

SUBSTRATE PREPARATION FOR APPLICATION OF CERESIT CM 29

CERESIT CM 29 adheres to all clean, hard, load-bearing, flat, dry and also wet substrates on which there are no substances that can reduce adhesion. Uneven areas or recesses must be levelled in advance.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

MIXING OF CERESIT CM 29

Pour the contents of the package into a measured amount of clean, cool water and stir with a drill with a mixer until a homogeneous mass without lumps is obtained. After that, you need to wait 5 minutes (swell time) and mix again. If necessary, carefully add water until the required consistency is reached. 

CERESIT Tiling CE60 LP Instructions Illustration Step 3

APPLICATION OF CERESIT CM 29

The adhesive should be applied with the appropriate jagged trowel, depending on the size of the tile in question. When used indoors, the mortar coating (contact area) on the back of the tile should be at least 65%. When used outdoors, the minimum mortar coating should be 90% (the combined laying method should be used, i.e. a thin layer of mortar should be additionally applied to the back of the tile). CERESIT CM 29 hardens quickly - the shortened film formation time and development time should be taken into account compared to normally hardening tile adhesive. 

Related how to guides

  • Premium Tiling System
    Providing Tiling Solutions
  • Laying Large Tiles
    Laying Large Tiles
  •  Preparation – testing the substrate
    Preparation – Testing The Substrate
  • Terraces, balconies and patios
    Terraces, Balconies And Patios
  • Bathrooms & Kitchens
    Bathrooms & Kitchens
  • Swimming & Wellness
    Swimming & Wellness
  • Tiling In Industrial Buildings
    Tiling In Industrial Buildings
  • Solutions For Special Formats & Substrates
    Solutions For Special Formats & Substrates
  • Heated floor systems
    Heated Floor Systems
  • Sound-reduction / Decoupling System
    Sound-reduction / Decoupling System

Related products

  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/product#/ceresit-cl-51/SAP_0201SKC013R0/searchResult.productFields.MainImageAltText}
    CERESIT CL 51
    Flexible one-component sealing film for application under tiles and slabs, suitable for domestic wet areas indoors. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/product#/ceresit-ce-43/SAP_0201SGC013N1/searchResult.productFields.MainImageAltText}
    CERESIT CE 43
    Mechanical and water-resistant grout mortar for joints of 1 to 20 mm width, suitable for heated floors and balconies. Perfect for high-traffic areas and wide joints. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/sealing/product#/ceresit-cs-25/SAP_0201POC014D6/searchResult.productFields.MainImageAltText}
    CERESIT CS 25
    High quality water resistant silicone for sealing connection & expansion joints in sanitary facilities. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/product#/ceresit-cl-152/SAP_0201SMC013Q6/searchResult.productFields.MainImageAltText}
    CERESIT CL 152
    Sealing tape for the waterproof bridging of expansion and connection joints up to 120 mm width, suitable for indoor and outdoor application. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/product#/ceresit-ce-60/SAP_0201SHC016K6/searchResult.productFields.MainImageAltText}
    CERESIT CE 60
    High quality and ready-to-use grout for joints up to 6 mm in width. 100% stable colors, very high dirt and stain resistance. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/product#/ceresit-cl-50/SAP_0201SLC013Q9/searchResult.productFields.MainImageAltText}
    CERESIT CL 50
    Two-component alternative sealing for waterproofing, suitable for wet areas such as bathrooms, balconies, swimming pools, etc. Certified for outdoor use. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/product#/ceresit-ce-40/SAP_0201SGC013M9/searchResult.productFields.MainImageAltText}
    CERESIT CE 40
    Water-resistant, flexible, grout mortar for porcelain, ceramic, glass, natural stones and marble tiles from 1 up to 8 mm width. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/product#/ceresit-ct-19/SAP_0201SOC014F8/searchResult.productFields.MainImageAltText}
    CERESIT CT 19
    Fast-acting special primer for a secure bond between ceramic coverings, natural stones, wall & floor screeding compounds and on difficult substrates. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/flooring/product#/ceresit-cn-72-express/SAP_0201TAC013Z4/searchResult.productFields.MainImageAltText}
    CERESIT CN 72 EXPRESS
    Self-levelling fast-curing floor levelling compound for layer thicknesses from 1 to 20 mm, suitable for dry areas and underfloor heating 

Frequently asked questions