Skip to Content

CERESIT IN 45 SUPER FINISH

  • Optimal hardness and elasticity
  • High strength
  • Machine application possible

Features and benefits

White gypsum finishing coat to be used as the final finishing layer under paint coats and wallpapers.

Properties

Description

CERESIT® IN 45 finish skim coat is used to make white and smooth wall and ceiling surfaces to be finished with paint coats and wallpapers. Thanks to the use of the SMART POLYMER Technology, a perfectly smooth and resistant surface can be achieved. CERESIT IN 45 has excellent adhesion to gypsum substrates, plasterboards, aerated concrete, cement and cement-lime plasters. It can also be applied on concrete substrates.Available pack size: 3 kg, 10 kg and 20 kg

Documents and downloads

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

SUBSTRATE PREPARATION FOR APPLICATION OF CERESIT IN 45

CERESIT IN 45 can be applied on load-bearing substrates that are dry and free from grease, bitumen, dust, loose plaster grains and other substances decreasing adhesion.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

MIXING OF CERESIT IN 45

The content of the package should be poured to a precisely measured amount of clean, cool water and stirred using a drill with a mixer until it forms a homogeneous mixture, free of lumps. Leave for approximately 5 min. and then stir the mixture again. 

CERESIT Tiling CE60 LP Instructions Illustration Step 3

APPLICATION OF CERESIT IN 45

The material shall be applied on the surface with a metal float. After application, the material shall be smoothed using a wide stainless steel float and left to dry. After the hardening of the material, the surface is ready for smoothing with sandpaper or a grinding mesh and a so-called giraffe grinder. 

Related how to guides

  • Priming for skim coats

Related products

  • ${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/product#/ceresit-ct-17/SAP_0201JAC014F1/searchResult.productFields.MainImageAltText}
    CERESIT CT 17
    Primer for surface strengthening of all absorbent substrates for indoor and outdoor application, prior to fixing ceramic tiles, pouring floors or fixing thermal insulation boards. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/product#/ceresit-in-10/SAP_0201JAC014Z9/searchResult.productFields.MainImageAltText}
    CERESIT IN 10
    Penetrating primer for use on absorbent substrates, suitable for finishing skim coats, paint coats and decorative coatings. 

Frequently asked questions